How To - Manually Provision W52P IP DECT Phone

Owned by David Klein
Last updated: Oct 09, 2020 by Eric Ronhovde
2 min read

Description:

This article will show you how to do the following:

  • Manually Provision a Yealink W52P IP DECT Phone

Methods:

  1. On the handset, press OK , and then navigate to Status > Base and verify the IP Address.
  2. In a web browser, navigate to the IP address for the Base.
  3. Enter the default username and password.
    • Username: audian
    • Password: 8446116110
  4. Navigate to the Settings Tab and choose the Time & Date option.
  5. Set the applicable time zone and location and hit Confirm at the Bottom of the Screen.
  6. Go to the Account Tab and set the following.
    1. Line Active: Enabled
    2. Label: Users Display Name
    3. Register Name: SIP Username Credential
    4. User Name: SIP Username Credential
    5. Password: SIP Password
    6. SIP Server Host: Realm
    7. Server Expires: 360
    8. Enable Outbound Proxy Server: Enabled
    9. Outbound proxy Server: Realm
    10. Proxy Fallback Interval: 360
  7. Click Confirm at the bottom.

Multiple Handsets

  1. If there are multiple handsets with a different line per handset, make sure to change the account at the top of the page to Account 2, and then repeat step 4.
  2. Under the Account Tab, select “Handset Name”.
  3. Change the handset name as desired, and then click Confirm.
  4. Select Number Assignment on the left.
  5. Assign the handsets to the lines/extensions desired, and then click Confirm.