How To - Factory Reset Yealink W52P IP DECT Phone
Owned by Eric Ronhovde
Description:
This article will show you how to do the following.
- Factory reset the Yealink W52p Handset and Base
NOTE: When factory resetting the Yealink W52p base station or de-registering a handset, you will need to reconfigure the handset/s to talk with the base station again.
Methods:
Reset Base Station
- Power off the base station.
- Hold down the Connect button.
- Power on the base station while holding down the Connect button.
- Once the Power, Network, and Phone lights are solid let go of the Connect button.
Reset Handset
Step 1: De-Register handset
- On the handset, press the Ok button.
- Navigate to Settings > Registration > De-reg. Handset, Enter the PIN “0000” to confirm.
- Highlight the handset to de-register a press the Select button.
- When the De-register message appears, press Yes.
Step 2: Reset Handset
- On the handset, press the Ok button.
- Navigate to Settings > System Settings > Handset Rest. > OK
- When prompted, press Enter.
- Enter the PIN 0000 and press Yes.