Cisco SPA122 Provisioning Guide

Owned by Eric Ronhovde
Last updated: Nov 10, 2022
1 min read

Description:

This article will show you how to do the following:

  • Setup a Cisco SPA122 device from factory defaults

Methods:

  1. Plug in the power adapter to the DC 5v port and the ethernet cable to the interet port.
  2. Plug your computer into the LAN (Yellow) port of the device.
  3. From that computer, open a browser window and navigate to 192.168.15.1.
  4. Sign in with admin / admin for the Username and Password.
  5. Click Voice at the top, and then select Provisioning from the left.
  6. Set Profile Rule to the http://z.audian.com/p/<Account Prov String>/spa$MA.cfg
  7. Set the Transport Protocol dropdown to HTTP.
  8. Click Submit, wait 5 minutes, if still not working reboot again by going to http://192.168.15.1/admin/reboot, and wait 5 more minutes.