Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

Description:

This article will outline how to setup traffic shaping on a Meraki to assist with bandwidth management for VoIP

Step By Step:

  1. Login to the Meraki Portal. From the menu on the right select Security Appliance -> Traffic Shaping
  2. Setup your max upstream/downstream bandwidth using the 95/5 rule.
    • Take the advertised speed and set 95% as the max available bandwidth. Since the upstream bandwidth is not always consistent and can differ (usually around 5%), this should set a safe limit. If you wish to be more conservative, set it to 90%.
  3. At the bottom of the page, Click on Add a new shaping rule and then add definitions which include the IP, and the type of service. SIP (Voice) should shape both SIP signalling and SIP RTP.
    • 54.148.70.218
    • 54.149.90.30
    • 52.11.88.63
    • 54.148.57.6
  4. Make sure that you set DSCP tagging to do not change DSCP key.
  5. Give this a priority of high.
  6. Click Save Changes.
  • No labels