Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

This article will show you how to do the following:

  • Place a call using the Handset, Headset and Speakerphone options

Description:

You can place a call in three ways using your SIP-T46G IP phone:

To dial a number, you do NOT need to dial a 1, 9 or any other number prior to entering your number. Just dial the 10 digit phone number you wish to call. There is not need to dial a “1” when dialing 800 numbers.

To place a call using the handset:

  1. Pick up the handset.
  2. Enter the desired number using the keypad.
  3. Press the OK button, the # button , or the Send soft key.

To place a call using the hands-free speakerphone mode:

  1. With the handset on-hook, press the speaker phone button .
  2. Enter the number or extension.
  3. Press the OK button, the # button , or the Send soft key.

To place a call using your headset:

  1. With the optional headset connected, press to activate the headset mode.
  2. Press the line key to obtain a dial tone. Enter the desired number using the keypad.
  3. Press the OK button, the # button , or the Send soft key.
  • No labels