Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Description:

This article will outline how to do the following:

  • Setup traffic shaping on a Meraki Switch to assist with bandwidth management for VoIP

Methods:

  1. Login to the Meraki Portal.
  2. From the menu on the right, select Security Appliance, and then Traffic Shaping.
  3. Setup your max upstream/downstream bandwidth using the 95/5 rule.
    • Take the advertised speed and set 95% as the max available bandwidth. Since the upstream bandwidth is not always consistent and can differ (usually around 5%), this should set a safe limit. If you wish to be more conservative, set it to 90%.
  4. At the bottom of the page, Click on Add a new shaping rule.
  5. Now click, Add+ to add definitions which include the all of IP addresses listed below and the type of service, SIP (Voice).

    Error rendering macro 'excerpt-include' : User 'null' does not have permission to view the page 'Audian IP Address Whitelist'.

  6. Set the Priority to High.
  7. Ensure that DSCP tagging is set to "Do not change DSCP key".
  8. Click Save Changes.
  • No labels