Page Comparison

...

Note

icon	false
title	Pre-Provisioning Steps

Connect the phone to the network and power it on. (If you will be using a computer to complete provisioning setup.
Ensure you have your PROVSTRING
- See Article: /wiki/spaces/SUPD/pages/1578081
Factory reset the phone.
- SPA303 through SPA525G: Press Menu > 14: Factory Reset
- SPA525G2 only: Menu > 9: Device Administration > 6: Factory Reset

The Admin Username and Password once the phone is configured would be UN: Audian admin & PW: 8446116110

Methods:

Info

icon	false

Expand

title	Provisioning (Web)

Find and note the phone's IP address.
- SPA303 through SPA525G: Press Menu > 9: Network.
- SPA525G2: Press Menu > 10: Status > 2: Network Status.
On a computer on the same network as the phone, enter the phone's IP address into the address bar of a web browser.
Log in to the web GUI and point the endpoint to Audian's configuration server:
1. Click on Admin Login in the top right corner, then click on Advanced also in the top right corner.
2. Now click on Provisioning > Configuration Profile
  - Add the following in the Profile Rule: http://q.audian.com/p/PROVSTRING/spa$MA.cfg
  - Set Transport Protocol: HTTP
3. Click Submit All Changes. (Phone should reset.)
Once the phone boots back up, type /admin/resync after the IP address.

- Note: Adding admin/resync? to the ip address will force the Cisco phone to update and reboot. (Example: Http://192.168.1.20/admin/resync?)

...