Versions Compared

Version Old Version 7 New Version Current
Changes made by

David Klein

Eric Ronhovde

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Description:

Tip

This article is the landing page for all Mikrotik articles.will show you how to do the following:

  • How to setup DHCP Opt 66

Methods:

Info
iconfalse

Description: Setting up the DHCP server with

opt

option 66 will allow phones to automatically connect to the Audian provisioning server and makes it a lot easier to set up a lot of phones.

  1. Log in to the
Mikrotik
  1. firewall web portal.
  2. Navigate to the DHCP Server option on the left side
  3. Click on the DHCP server option tab and click to add a new one.
  4. In the Name
it
  1. field, enter “Phone Option”.
Select
  1. Set the code as 66.
The
  1. Set the value
will be
  1. to the customer provision string
from the my.audian.com portal contained within two single quotes.
  1. For example ‘http://q.audian.com/p/CUSTOMPROVISIONSTRING’
Hit apply and ok
  1. found on the Audian portal.
  2. Hit Apply, and then Ok to save.
  3. Now go to the network within the DHCP Server, scroll down to “DHCP Option” and select the “Phone” option there. 
    1. If you have more than one option you can also first create a DHCP OptionSet which allows you to create more than one DHCP option.
Image Removed
  1. Image Added
Expand
titleHow To - Setup DHCP Opt Enable Option 66
Info
iconfalse
Info
iconfalse
Expand
titleDisable SIP ALG (SIP HELPER)
  1. In Winbox or Webfig, navigate to IP > Firewall > Service Ports
  2. Locate the SIP line and disable it.
  3. Restart the router and phones for the changes to take effect.
  • Note: To disable from the terminal, run this command: /ip firewall service-port disable sip