Page Comparison

This method only works for phones with the Polycom firmware v4.0.9.0509 or higher.

• 4.0.9.0509 has a grey and black UI.
• SIPIP is black and red and does not support this method.

This method can take a few tries in order to be successful. If you do not see the "Enter Password" screen try again.

1. From the Main Idle Screen (Where you can make a call) Hold down the buttons relating to the phone model listed above until it beeps or says "Enter Password"
   • Models: VVX 300, 310, 400, 410, 500, 600: Press the 1, 3, and 5 dial pad keys
2. Make sure no Asterisks are on the screen, indicating that characters had already been typed in for the password.
3. If there are asterisks on the screen, press the << softkey on the screen to delete them.
4. Type in the password 456 and press Enter.
   1. If the phone has previously contacted Audian servers, the password will be 8446116110.
   2. If the default 456 password and the Audian 8446116110 password do not work, please contact Audian support for the custom password.
5. Click here to provision the phone.

Note: If the phone shows Momentum Telecom, try the 8642 or 9632 for the Admin PW.

1. From the Main Idle Screen (Where you can make a call), hold down the buttons relating to the phone model listed above until it beeps or says "Enter Password"

   • Models: 321, 331, 335, 450, SoundStation 5000 , 7000 and SoundStation Duo: Press 1, 3, 5, and 7 dial pad keys

   • Models: 550, 560, and 650, and VVX 1500: Press 4, 6, 8, and * dial pad keys

   • Models: 6000: Press 6, 8, and * dial pad keys
2. Make sure no Asterisks are on the screen, indicating that characters had already been typed in for the password.
3. If there are asterisks on the screen, press the << softkey to delete them.
4. Type in the password 456 and press Enter.
   1. If the phone has previously contacted Audian servers, the password will be 8446116110.
5. Click here to provision the phone.