- Login to the Meraki Portal.
- From the menu on the right, select Security Appliance, and then Traffic Shaping.
- Setup your max upstream/downstream bandwidth using the 95/5 rule.
- Take the advertised speed and set 95% as the max available bandwidth. Since the upstream bandwidth is not always consistent and can differ (usually around 5%), this should set a safe limit. If you wish to be more conservative, set it to 90%.
- At the bottom of the page, Click on Add a new shaping rule.
Now click, Add+ to add definitions which include the all of IP addresses listed below and the type of service, SIP (Voice). - 52.11.88.63
- 52.27.186.140
- 54.86.30.113
54.144.238.86
| - 54.148.70.218
54.148.57.6 54.149.90.30
| 3.13.153.32 3.13.149.205 3.19.84.238 3.86.0.189
| 3.130.148.40 18.215.197.50 | Insert excerpt |
|---|
| Audian IP Address Whitelist |
|---|
| Audian IP Address Whitelist |
|---|
|
- Set the Priority to High.
- Ensure that DSCP tagging is set to "Do not change DSCP key".
- Click Save Changes.
|