Page Comparison

show you

how to do the following.

• Manually Provision a Yealink W52P IP DECT Phone

1. Press OK > On the handset, press OK , and then navigate to Status > Base on the handset and verify the IP Address.
2. Navigate to that IP address in a web browserIn a web browser, navigate to the IP address for the Base.
3. Enter the default username and password.
   • Username: audian/
   • Password: 8446116110
4. Navigate to the Settings Tab and choose the Time & Date option.
5. Set the applicable time zone and location and hit Confirm at the Bottom of the Screen.
6. Go to the Account Tab and set the following.
   
   1. Line Active: Enabled
   2. Label: Users Display Name
   3. Register Name: SIP Username Credential
   4. User Name: SIP Username Credential
   5. Password: SIP Password
   6. SIP Server Host: Realm
   7. Server Expires: 360
   8. Enable Outbound Proxy Server: Enabled
   9. Outbound proxy Server: Realm
   10. Proxy Fallback Interval: 360
   
7. Hit Click Confirm at the bottom.

Multiple Handsets

1. If there are multiple handsets with a different line per handset, make sure to change the account at the top of the page to Account 2, and then repeat step 4.
   
2. Under the Account Tab, select “Handset Name”.
3. Change the handsets name to the name of the line handset name as desired, and hit then click Confirm.
   
4. If you have multiple phones or multiple lines, it may become necessary to change the assignment of numbers.
5. If you have one line per phone, so that one extension on one and one on the other, it should configure itself automatically.Select Number Assignment on the left.
6. Assign the handsets to the lines/extensions desired, and then click Confirm.
   Image Added