How To - Statically Assign an IP to a Polycom

Owned by David Klein
Last updated: Jun 12, 2019 by Eric Ronhovde
1 min read

Description:

This article will show you how to statically assign an IP address to a Polycom phone. 

Step By Step:

  1. On your Polycom phone, press the Menu button.
  2. Select Settings.
  3. Select Advanced.
  4. Enter the password 8446116110 and press the Enter softkey.
  5. Select Admin Settings.
  6. Select Network Configuration.
  7. First Disable DHCP client by selecting it and using left right arrows to change.
  8. Press the OK softkey to continue.
  9. Select Phone IP Address to edit the address.
  10. Enter in an address that is available within your Local Area Network (Ask your IT professional if you need help with this)
  11. Press the OK softkey to continue.
  12. Continue Editing the Gateway and DNS Server Addresses.
  13. Press OK then the “Back” softkey.
  14. The phone will prompt you Exit without save or to Save and Reboot.
  15. Select Save and reboot.