Description:
For the Juniper SRX series firewalls there are two steps to take. First we want to disable the SIP ALG and then since the Juniper won't automatically NAT properly, we need to add our IP's to a trusted list.
...
Description:
Tip |
---|
|
This article will outline how to do the following: - Configure a Juniper SRX series firewalls for Audian service
|
Methods:
Info |
---|
|
Expand |
---|
| To disable SIP ALG, run these commands: #edit # set security alg sip disable # commit Running this command will show if this works: #run show security alg status You should see this: ALG Status : DNS : Enabled FTP : Enabled H323 : Enabled MGCP : Enabled MSRPC : Enabled PPTP : Enabled RSH : Enabled RTSP : Enabled SCCP : Enabled SIP : Disabled SQL : Enabled SUNRPC : Enabled TALK : Enabled TFTP : Enabled IKE-ESP : Disabled |
|
Info |
---|
|
Expand |
---|
title | Add Audian IP Addresses |
---|
| To setup our IP's we need this config:
Note |
---|
Please contact Audian support for a list of our IP addresses to be whitelisted. |
Code Block |
---|
language | applescript |
---|
theme | DJango |
---|
| [edit security address-book]
+ EXT_AB {
+ address SIP_1 5455.148555.70.218/32;
+ address SIP_2 54.148.57.6/32;
+ address SIP_3 52.11.88.6355.555/32;
+ address SIP_4 54.149.90.30/32;
+ attach {
+ zone untrust;
+ }
+ }
[edit security]
+ alg {
+ sip disable;
+ }
[edit security policies from-zone untrust to-zone trust]
+ policy Audian_SIP_Permit {
+ description Phones;
+ match {
+ source-address [ SIP_1 SIP_2 SIP_3 SIP_4 SIP_5 SIP_6 SIP_7 SIP_8 SIP_9 SIP_10 SIP_11 SIP_12 SIP_13 SIP_14 ];
+ destination-address any;
+ application [ Audian_SIP5060_5082 Audian_SIP11000 Audian_SIP_RTP16384_32768 ];
+ }
+ ## Warning: missing mandatory statement(s): 'then'
+ }
[edit]
+ applications {
+ application Audian_SIP5060_5082 {
+ protocol udp;
+ destination-port 5060-5082;
+ }
+ application Audian_SIP11000 {
+ protocol udp;
+ destination-port 11000;
+ }
+ application Audian_SIP_RTP16384_32768 {
+ protocol udp;
+ destination-port 16384-32768;
+ }
+ } |
|
|